 |
Solenoid valve (Pilot actuated square type (2)) |
 |
|
Redesigned Solenoid Valve F series |
 |
|
|
|
|
| "Low wattage plus single/double dual-use valves" allow energy-saving and low price! |
|
|
|
Solenoid Valves F Series have been very popular among customers due to single/double dual-use valves as well as dual-use fittings for different tube sizes, and they have been just redesigned. Six features including further miniaturization and low power consumption are newly added.
Redesigned Solenoid Valves F Series are good proposition for energy-saving solutions, very helpful in workplaces and in 100 percent pursuit of user-friendlier operability.
They have full of functions such as types with stop valve and with backpressure prevention valve. |
|
| * |
In case of seeing a movie, Windows Media Player is needed. Also, communication environment with 300kps or above is recommended. |
|
|
|
|
|
|
|
 |
  |
IP65 rated Solenoid Valve has been newly added to F10/F15 Series. |
 |
 |
 |
Variation |
 |
|
|
 |
| Q. |
What is the purpose of redesigning Solenoid Valves F Series ? |
|
|
|
| A. |
It is the reduction of power consumption by means of low wattage solenoids. Nowadays, the needs for CO2 reduction and energy-saving are growing more and more. In response to such needs, we have redesigned Solenoid Valves F Series. Redesigned Solenoid Valves F Series maintain the features of conventional Solenoid Valves F Series, are additionally equipped with new functions, and become easier-to-use products. |
| * |
For more information about the application and the product, contact us. |
|
|
|
|
|
 |
| Energy-saving proposition based on Solenoid Valves F10 and F15 Series |
*When low-current type is used, reduced power consumption has an energy-saving effect.
*In comparison with conventional standard type (0.9W power consumption), power consumption (CO2 exhaust emission) becomes 1/4. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 1.Further miniaturization and low power consumption are achieved. |
| *In comparison with conventional standard type (0.9W power consumption), power consumption is greatly reduced. Downsizing is also achieved. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 2.Tandem 3-port valve (4-position) is newly added. |
*Two 3-port valve functions integrated into one valve body.
*Ideally suited for the control of air-operated valves and single-acting cylinders. Space-saving type. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 3.Wire-saving type is newly added to the monoblock manifold. |
*Wire-saving type is newly added.
*Wiring specification newly includes flat cable connector and D-sub connector. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 4.Type with stop valve is newly added as an option. |
*Valve replacements can be made without any downtime of various production lines.
*Without stopping main air line, each flow path can be closed and opened independently. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 5.Backpressure prevention valve is newly added as an option. |
*Prevents erroneous operation of cylinders caused by exhaust from other valves.
*Prevents backpressure troubles in the operation of single-acting cylinders. |
|
 |
|
|
|
| Redesigned Solenoid Valves F10 and F15 Series [six features] |
| 6.Low height allows compact and smart appearance. |
*In comparison with conventional valves, the height of Monoblock Manifold F Type is lowered.
*Wire-saving type is newly added to Monoblock Type Manifold (F10 and F15 Series). |
|
 |
|
|
|
| User friendlier operability of conventional valves is maintained. |
*Single/double dual-use valves.
*Dual-use fittings for different tube sizes.
*Exchangeability between base piping and direct piping. |
|
 |
|
|
|
| Redesigned F Series Product Range (Single Valve Unit) |
*Comparing to conventional valves, single valve units are compactly designed.
*Also mountable on conventional manifolds. |
|
 |
|
|
|
| Redesigned F Series Product Range (Manifold) |
*Wire-saving type is newly added to Monoblock Manifold A Type and F Type (F10 and F15 Series)
*Conventional product range is also available. |
|
 |
|
|
|
| Redesigned F Series Product Range (Wiring Specification, Serial Transmission) |
| *A wide range of variations including type without power terminal. |
|
 |
|
|
|
|
|
 |
|
|
 |
| Types |
Models |
Description |
Price(JPY) |
| BODY |
F10T0-A1-PS 24VDC |
Width:10mm, Effective area:5mm2, Direct piping, 2-position Single Solenoid only, A type output block attached, S type plug connector 300mm, 24VDC |
6,000(JPY) |
| BODY |
F10T1-A1-PS 24VDC |
Width:10mm, Effective area:5mm2, Direct piping, 2-position Single Solenoid (single and double dual-use), A type output block attached, S type plug connector 300mm, 24VDC |
7,000(JPY) |
| BODY |
F10T2-FJ-PS 24VDC |
Width:10mm, Effective area:5mm2, Direct piping, 2-position Double Solenoid (single and double dual-use), Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
7,600(JPY) |
| BODY |
F10T3-FJ-PS 24VDC |
Width:10mm, Effective area:5mm2, Direct piping, 3-position Double Solenoid Closed center, Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
10,250(JPY) |
| BODY |
F15T0-A1-PS 24VDC |
Width:15mm, Effective area:10mm2, Direct piping, 2-position Single Solenoid only, A type output block attached, S type plug connector 300mm, 24VDC |
7,300(JPY) |
| BODY |
F15T1-A1-PS 24VDC |
Width:15mm, Effective area:10mm2, Direct piping, 2-position Single Solenoid (single and double dual-use), A type output block attached, S type plug connector 300mm, 24VDC |
8,400(JPY) |
| BODY |
F15T2-FJ-PS 24VDC |
Width:15mm, Effective area:10mm2, Direct piping, 2-position Double Solenoid (single and double dual-use), Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
9,000(JPY) |
| BODY |
F15T3-FJ-PS 24VDC |
Width:15mm, Effective area:10mm2, Direct piping, 3-position Double Solenoid Closed center, Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
11,200(JPY) |
| BODY |
F18T0-A1-PS 24VDC |
Width:18mm, Effective area:18mm2, Direct piping, 2-position Single Solenoid only, A type output block attached, S type plug connector 300mm, 24VDC |
9,000(JPY) |
| BODY |
F18T1-A1-PS 24VDC |
Width:18mm, Effective area:18mm2, Direct piping, 2-position Single Solenoid (single and double dual-use), A type output block attached, S type plug connector 300mm, 24VDC |
9,000(JPY) |
| BODY |
F18T2-FJ-PS 24VDC |
Width:18mm, Effective area:18mm2, Direct piping, 2-position Double Solenoid (single and double dual-use), Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
9,700(JPY) |
| BODY |
F18T3-FJ-PS 24VDC |
Width:18mm, Effective area:18mm2, Direct piping, 3-position Double Solenoid Closed center, Dual-use fitting block for output port attached, S type plug connector 300mm, 24VDC |
11,900(JPY) |
|
|
|
|
|
