 |
|
|
 |
Standard cylinder (Compact type) |
|
|
Jig Cylinder C Series |
 |
|
|
|
|
World's first!* Single rod stroke-adjustable cylinder, whose push-side strokes are adjustable. *According to our investigation as of April, 2008.
Also, Low-friction cylinder is released, where 1mm/s of operating speed is realized at 0.01MPa of operating pressure. |
|
|
|
"Stroke-adjustable cylinder" and "Low-friction cylinder" are added to the JIG Cylinder C Series, which will broaden the width of choice for the customer's request.
"Stroke-adjustable cylinder" allows the adjustment of push-side strokes for the first time of the world among single rod cylinders (patent pending).
"Low-friction cylinder" allows low pressure actuation and low speed operation with the minimum operating pressure at 0.01MPa and the minimum operating speed at 1mm/s. In addition, clean specification is also available. |
|
|
|
|
|
|
|
|
|
|
 |
  |
|
 |
| Q. |
What are the features of "Stroke-adjustable cylinder" and "Low-friction cylinder" released this time ? |
|
|
|
| A. |
"Stroke-adjustable cylinder" has no rear dead space different from a conventional stroke-adjustable cylinder, which makes it possible to design compact equipment. In addition, the adjustment gear to adjust strokes is located on the cylinder rod side, and it is unneeded to take up space for maintenance backward.
"Low-friction cylinder" is a thin-shaped cylinder which allows low pressure actuation and low speed operation. Further, it is available with the bore size of 6mm to 40mm, and is ideal for small parts assembling equipment. |
|
|
| Q. |
Where are "Stroke-adjustable cylinder" and "Low-friction cylinder" used ? |
|
|
|
| A. |
"Stroke-adjustable cylinder" is used in the press-fit and positioning lines requiring the minute adjustment of strokes after mounted. Also, the space at the rear of the cylinder is effectively utilized.
"Low-friction cylinder" is suitable for push pressure control and tension control, as well as for precision conveyance lines by utilizing its feature of the minimum operating speed of 1mm/s. |
|
| * |
If you want to know more details, contact us by click. |
|
| Q. |
What is the superiority of the cylinder bore size of 6, 8 and 10mm ? |
|
|
|
| A. |
Adding small cylinder sizes to the conventional lineup makes it possible to design machines and equipment with high efficiency. At the same time, by adapting tubes with O.D. of 2mm, TAC fittings and compact ZE sensor switches, this cylinder can contribute to miniaturization of equipment bodies. |
|
|
|
|
| Q. |
What difference is there between the conventional JIG Cylinder and the JIG Cylinder C series ? |
|
|
|
| A. |
While the rigidity of the conventional cylinder is maintained, the main body of C series is made thin as far as possible. |
|
| |
|
|
| Q. |
What is the suitable application of the cylinder bore size of 6, 8 and 10mm ? |
|
|
|
| A. |
Recently, with diversification of consumer’s needs, cell production system to produce a diversity of product types in a small volume is adopted in the production lines of electric, electronic and communications industries. Accordingly, the needs of small cylinders are increasing in the actual field of cell production, because in case of emergency, small cylinders would be safer to workpieces and operators than large cylinders which can generate big thrust. Responding to such needs, cylinders with the bore size of 6, 8 and 10mm are currently added to the series. |
|
| * |
If you want to know more details, contact us by click. |
|
|
|
 |
World's first!* Single rod stroke-adjustable cylinder, whose push-side strokes are adjustable.
*According to our investigation as of April, 2008. |
|
| New system for stroke adjustment! Rotating the adjustment gear enables the minute adjustment of push-side strokes. |
|
 |
|
| Easy stroke adjustment is possible. |
|
1.Prepare a pin or like, put it into the hole of the adjustment gear and rotate the gear.
2.Adjust stroke as required (stroke range: 0 to -5mm).
3.After adjustment, tighten the fixing screw. |
|
 |
|
| "Low-friction cylinder" featuring both low-pressure actuation and low-speed operation. |
|
| Sudden start from rest is reduced by its small sliding resistance. Also, stick-slip is so little that smooth operations are achieved. The minimum operating pressure of 0.01MPa and the minimum operating speed of 1mm/s are realized. |
|
 |
|
| "Low-friction cylinder" with clean specification has been developed too. |
|
| It corresponds to cleanliness JIS, ISO class 4 (FED-STD class 10). |
|
 |
|
|
|
 |
|
|
 |
| Types |
Models |
Description |
Price(JPY) |
| BODY |
CDA 6*5 |
Bore 6mm Stroke 5mm |
2,600(JPY) |
| BODY |
CDA 8*10 |
Bore 8mm Stroke 10mm |
3,100(JPY) |
| BODY |
CDA 10*20 |
Bore 10mm Stroke 20mm |
4,150(JPY) |
| BODY |
CSA 6*5 |
Bore 6mm Stroke 5mm |
2,600(JPY) |
| BODY |
CSA 8*10 |
Bore 8mm Stroke 10mm |
3,100(JPY) |
| BODY |
CSA 10*10 |
Bore 10mm Stroke 10mm |
3,100(JPY) |
| BODY |
CTA 6*5 |
Bore 6mm Stroke 5mm |
2,600(JPY) |
| BODY |
CTA 8*10 |
Bore 8mm Stroke 10mm |
3,100(JPY) |
| BODY |
CDAD 6*10 |
Bore 6mm Stroke 10mm |
4,000(JPY) |
| BODY |
CDAD 10*20 |
Bore 10mm Stroke 20mm |
5,100(JPY) |
| BODY |
CDAS 6*5 |
Bore 6mm Stroke 5mm
Cylinder with magnet |
3,700(JPY) |
| BODY |
CDAS 10*20 |
Bore 10mm Stroke 20mm
Cylinder with magnet |
5,250(JPY) |
| BODY |
CSAS 8*10 |
Bore 8mm Stroke 10mm
Cylinder with magnet |
4,200(JPY) |
| BODY |
CTAS 6*5 |
Bore 6mm Stroke 5mm
Cylinder with magnet |
3,700(JPY) |
| BODY |
CDADS 10*20 |
Bore 10mm Stroke 20mm
Cylinder with magnet |
3,700(JPY) |
| SENSOR SWITCH |
ZE135A1 |
Reed switch 2-wire
length 1000mm 1 piece |
2,500(JPY) |
| SENSOR SWITCH |
ZE155A1 |
Reed switch 3-wire
length 1000mm 1 piece |
2,600(JPY) |
|
|
|
|
|
|
 |
 |
|
|
|
